JT Series Saw-tooth-wave Jigger
HomeTOMINE MineralJigging Equipments

JT Series Saw-tooth-wave Jigger

The difference between saw-tooth wave jig and sine wave jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under-size fraction.

Contact Download
Main Feature

  • High capacity
  • High concentration ratio and high recovery
  • Easy to install, operate and maintain
  • The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
Technical Specification
 

 

Model

Jig hutch Diaphragm  

Feeding size (mm)

 

Amount of make-up water (m3/t)

 

Make-

up water pressure (Mpa)

 

 

Capacity (t/h)

 

 

Power (kw)

 

 

Dimensions (mm)

 

 

Weight (Kg)

 

Shape

 

Area (m2)

 

Stroke (mm)

 

Frequency of stroke (r/min)

JT0.57-1 Trapezoid 0.57  

8.5—12

10—17

12-21

 

 

80-180

<6 1-2  

 

 

 

 

≥ 0.05

1.5-3 1.5 1550×780×1530 610
JT1-1 Trapezoid 1.04 <10 2-3 2.5-5 2.2 2270×1110×1890 900
JT2-2 Rectangle 2.28 <10 2-4 5-10 3 3225×1550×2050 1640
JT3-1 Trapezoid 3 12-30 <10 3-6 7.5-15 5.5 2745×2000×3030 3085
JT4-2 Rectangle 4 25-57 <25 4-8 8-20 7.5 4240×1990×2750 3098
JT4-2S Rectangle 4 25-57 <25 4-8 8-20 4×2 4240×1990×2750 3500
JT5-2 Trapezoid 4.86 12-30 <10 3-6 12-25 7.5 3600×2000×2600 4500
Solution
Industry Application
Leave Message
Please Leave your Message Here! We will send detail technical info and quotation to you!